『Porous plate flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
1. Advantages of Porous Separators
The advantages of porous separators are to control the process, allowing the reaction to stop or start with a collision. Control the reaction to allow the solid substance to be on the partition, and as the reaction proceeds, the solid on the partition comes into contact with the liquid, allowing the reaction to proceed; When the water stop clamp is closed, the gas produced increases in pressure, pushing the liquid into the long necked funnel, separating the solid and liquid on the flushing partition, and stopping the reaction. Introduction to Porous Diaphragm Porous orifice plate is a revolutionary differential pressure flow meter, which works on the same principle as other differential pressure flow meters, based on the energy conversion principle in sealed pipelines: under ideal fluid conditions, the flow rate in the pipeline is proportional to the square root of the differential pressure. By measuring the differential pressure value, the flow rate in the pipeline can be calculated based on the Bernoulli equation. The balanced flow sensor is a porous disc throttling rectifier installed on the cross-section of the pipeline, with each holes size and distribution customized based on special formulas and test data, known as a function hole. When the fluid passes through the function hole of the disk, it will be balanced and rectified, the vortex will be minimized, and an approximate ideal fluid will be formed. Through the pressure measuring device, a stable differential pressure signal can be obtained, and the volume flow rate and mass flow rate can be calculated according to the Bernoulli equation.
2. What type of balance flowmeter does it belong to? What are the advan
The balanced flowmeter belongs to the innovative differential pressure flowmeter, which is based on the classical differential pressure measurement principle and solves many drawbacks of the traditional orifice plate flow meter through structural innovation, becoming an important milestone in the development of differential pressure flowmeter technology.. The unique advantage of becoming the preferred choice for harsh working conditions significantly reduces permanent pressure loss. The balance flowmeter adopts a porous symmetrical balance design, which disperses fluid impact through multiple function holes, reducing turbulent shear forces and vortex formation. This structure significantly reduces kinetic energy loss, and under the same bending and branching conditions, its permanent pressure loss is only 1/2.5 of that of a conventional orifice flowmeter, thus significantly saving operating energy costs. For example, in steam metering scenarios, long-term operation can reduce pumping energy consumption and carbon emissions. Strong durability and medium adaptability, wear resistance, and long lifespan: After the reduction of turbulent shear force, the direct friction of the medium on the throttling element is reduced, the lifespan of the throttling element is extended, and the β value (diameter ratio) remains stable for a long time. Compatibility with complex media: It can measure mixed gases, gas-liquid two-phase flows (such as moisture), slurries, multiphase water flows, vibrating water flows, electromagnetic interference media, and bidirectional flows, suitable for complex working conditions in industries such as chemical, petroleum, and powe
Hot Product
Related AD
