『Vortex flowmeter and vortex street』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. What is the difference between a turbine and a vortex gas flowmeter?
The difference between vortex flowmeter and vortex flowmeter. Vortex flowmeter is a device that sets a stagnation piece in the flowmeter pipeline. When the fluid flows through the stagnation piece, two asymmetric vortices will be generated downstream due to the stagnation effect on the surface of the stagnation piece. These vortices will separate on the side and rear of the stagnation piece, forming a so-called Karman vortex column. The rotation direction of the two vortices is opposite. Karman theoretically proved that when h/l=0.281 (h is the width between two vortex columns, and l is the distance between two adjacent vortices), the vortex column is stable. In this case, the frequency of vortex generation The relationship between f and the fluid velocity υ in the flowmeter pipeline is: f=sv/dv=df/s, where d represents the diameter of the cylindrical stagnation component; S - dimensionless constant, called Strouhal number, related to the Reynolds number re of the fluid flow state. The Reynolds number re of a circular cross-section pipeline with a flow meter is: where υ - the flow velocity of the fluid, m/s; ρ - density of fluid, kg/m3; μ - dynamic viscosity of fluid, (kg?m-1)/s。 And the flow rate of the fluid: q=a * v can be seen from the above equation. After the selection and design of the vortex flowmeter, the flow rate q is not only related to f, but also to the Reynolds number re. The Reynolds number re is a dimensionless number that characterizes the flow characteristics of viscous fluids, and its physical meaning is the ratio of the inertial force to the viscous force of fluid flow. Therefore, the flow state of the fluid also has

2. What is the difference between a vortex flowmeter and a vortex flowmeter?
The difference between a vortex flowmeter and a vortex flowmeter: their working principles are different.
.1. Working principle of vortex flowmeter: A flowmeter using the Kalman vortex principle: When a fluid passes through a cylindrical object to suppress dust, vortices will be generated on both sides of the object facing away from the fluid. When one side of the vortex develops, it will suppress the vortex on the other side. When one side of the vortex develops to a certain extent, it will detach from the cylindrical object and leave with the fluid, generating new vortices in situ. At the same time, the vortex on the other side develops due to the loss of suppression

Hot Blog
Related AD
